Export 625*1000mm PVC Fill to Malaysia

This type of PVC fill is for cross flow cooling tower, we can make both PP and PVC material.
Size is 625*1000mm, it has drift eliminators edges for all four sides.

PVC fill is for cross flow cooling tower PVC fill is for cross flow cooling tower

Our customers already installed to the cooling tower fill, herewith the pictures from our customers.

cooling tower fill
cooling tower fill

评论

发表评论

此博客中的热门博文

What Size Does PVC Fill for The Cooling Tower?

图片
Cooling towers are used in various industrial applications to remove waste heat from industrial processes, power generation, and air conditioning systems. One of the essential components of a cooling tower is the PVC fill, which is responsible for maximizing the heat transfer between the water and air. In this article, we will discuss what size PVC fills are suitable for cooling towers and the factors that affect their selection.   What are PVC Fills?   PVC fills  are a type of heat exchange media used in cooling towers. They are made from high-quality PVC materials that are designed to enhance heat transfer by increasing the surface area between the water and air. The PVC fill is positioned in the cooling tower to create a large wetted surface area, allowing the water to flow over it and come into contact with the air.   Factors That Affect PVC Fill Selection   When selecting PVC fills for cooling towers, there are several factors to consider, including:  ...
阅读全文

How do cooling towers work explanation?

图片
Our company is  cooling tower fill manufacturer  in China. Here we want to introduce the work explanation of cooling tower. What are cooling towers? Cooling towers are a special type of heat exchanger that allows water and air to come in contact with each other to lower the temperature of the hot water. During this process, small volumes of water evaporate, lowering the temperature of the water that's being circulated throughout the cooling tower. In a short summary, a cooling tower cools down water that gets over heated by industrial equipment and processes. The hot water is usually caused by air conditioning condensers or other industrial processes. That water is pumped through pipes directly into the cooling tower. Cooling tower nozzles are used to spray the water onto to the " cooling tower filler ", which slows the water flow down and exposes the maximum amount of water surface area possible for the best air-water contact. The water is exposed to air as it...
阅读全文

What is a sponge filter and how does it work?

图片
  A   sponge filter   is little more than a piece of foam that sits inside your aquarium and filters your water. No, seriously – it’s as simple as that! While sponge filter designs vary from brand to brand, they are typically made up of four different parts: Different parts of a sponge filter diagram 1. Foam sponge – It wouldn’t be a sponge filter without it. 2. Weighted base – Stops the sponge filter from floating around your tank. The sponge sits on top of this base. 3. Strainer and bulls eye–Slides inside the sponge and allows you to connect airline tubing directly to the filter. 4. Lift tube – Water flows up this and back into your tank. While it may not look like much, these four parts actually form a very effective filter. As for how a sponge filter works, well, it’s very clever… How a sponge filter works diagram With a good air pump attached, bubbles rise up the lift tube and out into your tank. This forces water to be drawn through the foam sponge. As water passes...
阅读全文