What is the Removal and Cleaning of the Point Wave Packing of the Cooling Tower?

As a Cooling Tower Fill Replacement Supplier, share it with you.

The packing in the cooling tower needs to be cleaned regularly, because the dirt on it will affect the cooling efficiency of the cooling tower. Different types of cooling towers have different ways of installing packing, such as suspended and tiled. So how to clean and install the spot wave packing? Let's look at the details of the removal, cleaning and installation of the spot wave packing in the cooling tower.



Cooling Tower Fill

Point wave packing is generally used in cross-flow cooling towers. The packing of cross-flow towers is easier to disassemble, but it is not easy to disassemble like Marley cooling tower packing (suspended). Remove the filler and soak it in the descaling solution for about 2 minutes, and then rinse with water. It should be noted that most potions contain hydrochloric acid, and a self-made glass steel sink is generally used as a soaking tank.

For cross-flow towers with suspended packing, the packing of counter-flow cooling towers are not easy to disassemble. Generally, the valve of the inlet and return water should be closed first, and the return water inlet should be closed if possible. Then put the chemical water in the cooling tower water tray. The concentration of the chemical water should be controlled well to avoid corrosion of pipe fittings and structural parts. Put a small water pump in the water storage tray and pump the chemical water to the upper part of the cooling tower to spray and clean the packing. It takes a whole day to circulate for cleaning.

In the installation process of the packing, it is necessary to clean up the packing layer and the layer in time so that the packing does not leave scattered debris. After the packing is installed, when it is necessary to work on the packing, the eliminator packing must be covered with wooden boards, and it is strictly forbidden to step on it directly. When installing, send a special person to check the quality and make a record of construction acceptance to ensure the quality of the installation.

Packing plays an important role in cooling towers. Regular cleaning and replacement are essential tasks. The details of the removal, cleaning and installation of the cooling tower point wave packing are introduced. Friends who don't understand can consult us at any time.

Our company also has Cooling Tower Fill on sale, welcome to contact us.

评论

发表评论

此博客中的热门博文

How do cooling towers work explanation?

图片
Our company is  cooling tower fill manufacturer  in China. Here we want to introduce the work explanation of cooling tower. What are cooling towers? Cooling towers are a special type of heat exchanger that allows water and air to come in contact with each other to lower the temperature of the hot water. During this process, small volumes of water evaporate, lowering the temperature of the water that's being circulated throughout the cooling tower. In a short summary, a cooling tower cools down water that gets over heated by industrial equipment and processes. The hot water is usually caused by air conditioning condensers or other industrial processes. That water is pumped through pipes directly into the cooling tower. Cooling tower nozzles are used to spray the water onto to the " cooling tower filler ", which slows the water flow down and exposes the maximum amount of water surface area possible for the best air-water contact. The water is exposed to air as it...
阅读全文

What Size Does PVC Fill for The Cooling Tower?

图片
Cooling towers are used in various industrial applications to remove waste heat from industrial processes, power generation, and air conditioning systems. One of the essential components of a cooling tower is the PVC fill, which is responsible for maximizing the heat transfer between the water and air. In this article, we will discuss what size PVC fills are suitable for cooling towers and the factors that affect their selection.   What are PVC Fills?   PVC fills  are a type of heat exchange media used in cooling towers. They are made from high-quality PVC materials that are designed to enhance heat transfer by increasing the surface area between the water and air. The PVC fill is positioned in the cooling tower to create a large wetted surface area, allowing the water to flow over it and come into contact with the air.   Factors That Affect PVC Fill Selection   When selecting PVC fills for cooling towers, there are several factors to consider, including:  ...
阅读全文

GRP Water Tank

图片
GRP Water Tank GRP Water Tank/ SMC Water Tank /FRP Water Tank GRP module water tank is a new type water tank after the development of reinforced concrete water tank , steel plate water tank, stainless steel water tank.GRP water tank  combined with the GRP   molding panel, sealing materials, metal structure and piping system to onsite assemble together. 1. FRP Water Tank  Features and structure 1) Strong resistance to corrosion. 2) Reasonable structure design. 3)All welded on-site combination. High strength, good sealing, prevent secondary pollution of water quality. 4) Light weight, that is one half of ordinary steel plate water tank. 5) Easy to install. 6) Clean, bright, beautiful appearance. 2. Panel type water tank  size for your reference Water tank size: Can be made as your reuqest. Panel size: 1mx1m, 0.5mx0.5m, 1mx0.5m Wall board thickness: 5mm,8mm,10mm,12mm,14mm,16mm etc. 3.Accessories and specifications 1) Support for Panels: ...
阅读全文