Cooling Tower PP Infill-CF950-SW

Cooling Tower PP Infill-CF950-SW
Cooling tower fill introduction
Cooling Tower filler is one of the most important components for exchange of gas and water in cooling tower. Cooling tower PP fill is the major parts to improve the efficiency of cooling tower and make sure the economy and safe operation.
Specification
Type
CF750-LC
Material
PP/PVC
Width
950mm
Length
as you request
Thickness
from 0.28mm to 0.38mm
Sheet Space
20mm

评论

发表评论

此博客中的热门博文

How do cooling towers work explanation?

图片
Our company is  cooling tower fill manufacturer  in China. Here we want to introduce the work explanation of cooling tower. What are cooling towers? Cooling towers are a special type of heat exchanger that allows water and air to come in contact with each other to lower the temperature of the hot water. During this process, small volumes of water evaporate, lowering the temperature of the water that's being circulated throughout the cooling tower. In a short summary, a cooling tower cools down water that gets over heated by industrial equipment and processes. The hot water is usually caused by air conditioning condensers or other industrial processes. That water is pumped through pipes directly into the cooling tower. Cooling tower nozzles are used to spray the water onto to the " cooling tower filler ", which slows the water flow down and exposes the maximum amount of water surface area possible for the best air-water contact. The water is exposed to air as it
阅读全文

GRP Water Tank

图片
GRP Water Tank GRP Water Tank/ SMC Water Tank /FRP Water Tank GRP module water tank is a new type water tank after the development of reinforced concrete water tank , steel plate water tank, stainless steel water tank.GRP water tank  combined with the GRP   molding panel, sealing materials, metal structure and piping system to onsite assemble together. 1. FRP Water Tank  Features and structure 1) Strong resistance to corrosion. 2) Reasonable structure design. 3)All welded on-site combination. High strength, good sealing, prevent secondary pollution of water quality. 4) Light weight, that is one half of ordinary steel plate water tank. 5) Easy to install. 6) Clean, bright, beautiful appearance. 2. Panel type water tank  size for your reference Water tank size: Can be made as your reuqest. Panel size: 1mx1m, 0.5mx0.5m, 1mx0.5m Wall board thickness: 5mm,8mm,10mm,12mm,14mm,16mm etc. 3.Accessories and specifications 1) Support for Panels: The panels shall be
阅读全文

What Size Does PVC Fill for The Cooling Tower?

图片
Cooling towers are used in various industrial applications to remove waste heat from industrial processes, power generation, and air conditioning systems. One of the essential components of a cooling tower is the PVC fill, which is responsible for maximizing the heat transfer between the water and air. In this article, we will discuss what size PVC fills are suitable for cooling towers and the factors that affect their selection.   What are PVC Fills?   PVC fills  are a type of heat exchange media used in cooling towers. They are made from high-quality PVC materials that are designed to enhance heat transfer by increasing the surface area between the water and air. The PVC fill is positioned in the cooling tower to create a large wetted surface area, allowing the water to flow over it and come into contact with the air.   Factors That Affect PVC Fill Selection   When selecting PVC fills for cooling towers, there are several factors to consider, including:   Cooling Tower Size The size
阅读全文